Discover something very special! (08) 9572 1443
 
 
Strong, Reliable and Cost Efficient Bulk Water Storage.

For a total lowest cost solution to your bulk water storage, you need look no further.

No matter what the application; no matter where the application; here is a modular storage system that that can be used for a multitude of different purposes.

There are now more choices than ever before. Not only can we offer strong modular systems with internal liners, but also tanks with the revolutionary glass fused to steel protective coating, as well as Epoxy Coated and Stainless Steel.

 
 

 
 
 Go Direct To:
Choices
Mining, Industrial
Agriculture & Aquaculture
 
 

Choices

 
 
Pre-Fab

Supplied in space saving kit form, steel prefabricated tanks offer a very economical and long lasting storage alternative. The kit form offers many advantages including cheaper freight costs; ease of installation in inaccessible locations; and of course easy relocation should the need arise. And yet strength and long life expectancy are not compromised.

The fully corrugated wall profile provides superior strength and stability. This is particularly important in high flow, fast fill and empty applications. Each corrugation acts as a strengthening rib - right from the bottom to the top.

This tank has been specifically engineer designed to withstand the severest of conditions. The corrugated walls are so strong that they can happily operate without a roof if needed without compromising the strength. They are not dependent on a roof for wall stability. However, most applications are better suited with a roof fitted.

The liquid is contained by using an extra strong internal single layer geo-membrane which has also been selected for its extra strength and longevity. Under the brand name HYDROSTORE, it is manufactured from a unique grade of linear low-density polyethylene and provides the required flexibility a liner used for water storage demands.

Constant fluctuations in the water levels have no effect on Hydrostore's performance. And being a single layer geomembrane means that it is not subject to a process called "wicking" which can occur in layered or woven membranes.

Evidence of the strength of Hydrostore was shown when tested under Australian Standard ASTM D4833. This covers the Puncture Resistance and it achieved a rating of an amazing 2400 PSI. This is a genuine test of the stresses and strains found in a typical field application.

So you can have utmost assurance that walls and liner are of the highest standards available, which gives you confidence to expect years of maintenance free service.

LINER MANUFACTURE PROCESS





 

 



 
 
Glass Fused to Steel

For the absolute ultimate in protective coatings, we are proud to announce a revolutionary coating system called Glass-fused- to-steel. It is a process which is relatively new to Australia but is found the world over. Developed in the 1940’s, glass fused to steel offers a life long coating to steel panels.

The steel panels are carefully prepared, cleaned and primed before being placed in a furnace and heated to over 860 degrees Celsius.

As the surface of the steel melts, Silica glass is added which also melts and fuses to the surface. Note that it fuses and not simply “bonds” to the surface. It actually becomes an integral part of the whole panel. It will not lift off after a period of time.

This means that the life expectancy cost is superior to that of welded steel or concrete tanks. Maintenance is virtually eliminated as glass coatings do not require periodic repainting and most graffiti can be removed in a matter of minutes.

Each tank is made from individually bolted panels, and sealed with specially selected sealants with specific chemical resistant properties suited to the liquids to be stored.

The tanks can be built with either a concrete base, or we can provide a glass fused to steel base.

Applications are numerous, but the most common are:

  Potable water
  Wastewater treatment including clarifiers, digester, landfill leachate etc
  Fire protection

 



 
 
Epoxy Coated Tanks

Representing a cheaper alternative, epoxy coated tanks have an interior coating system that combines great chemical resistance yet still meets relevant standards for potable water.

Although the tank pictured here is located in America, it gives an indication of the extremes of sizes and shapes available.

This tank is used for fire protection water storage. It is approx 32 metres high, 8 metres diameter and holds about 1,500,000 litres.

 

 

 

 



 
 
Stainless Steel

For those rare but specific projects which demand special requirements. Stainless steel fabricated tanks withstand the wider range of temperatures and pH factors often found in industrial applications.

They are virtually maintenance free and especially suited to corrosive environments.

Available in 304, 304L, 316 or 316L grades of stainless.

 



 
 
NOT JUST LIQUID STORAGE!

Ask about the range of dry bulk storage tanks including grain, plastics, minerals etc.

Contact Us



Applications

 
 
MINING, INDUSTRIAL

Versatility is a major feature of these tanks. Although the standard wall height is 2.2 meters, the diameter and height can be easily varied. Because of the modular design, they can be designed and installed on almost any area to meet space requirements.

The applications are many, but some of the most common include:

  Mine site de-watering
  Waste water treatment
  Domestic water supplies for camps
  Fire water storage
  Sewerage treatment and
  General water supplies

Close alliances with experts in various fields means Ebenezer Water is ideally situated to offer complete "turnkey" operations for any of the above applications.

Ebenezer Water has proven themselves as both reliable and superior when it comes to building water supplies required by the mining industry.

Establishing a list of clients that ranges from government to diamond mine sites, the team at Ebenezer Water have also travelled internationally to fulfil water requirements, this being a credit to their name.

 

FIRE PROTECTION

PINJAR POWER STATION

480 kl fire storage tank at Western Power's Pinjar power station north of Wanneroo.

 

 

WREN OIL - BUNBURY

2 x 430 kl water tanks protecting an oil recycling plant.

 

 

GENERAL WATER SUPPLIES

GRANNY SMITH MINE

2 x 175kl and 2 x 150kl water supply tanks erected at the Lavertonmine site to supply the whole camp with fresh water and fire protection.

 

MINE SITE DE-WATERING

ARGYLE DIAMOND MINE

2 X 115kl tanks used as staging tanks to de-water the minesite floor. Water is transferred at a rate of up to 300 litres per second by means of 3 x 90kw submersible pumps mounted inside each tank.

 

 

SEWAGE TREATMENT

MINISTRY OF JUSTICE - WOOROLOO

2 x 240kl tanks which are used to treat the raw sewerage which comes from 750 inmates and officers at the new Acacia Prison.

 

MEXICO

MEXICO

6 x 250 kl tanks were installed to treat the raw sewage from an entire village located about 2 hours drive north west of Mexico City. Work was supervised by Ebenezer Water with the assistance of local villagers. A similar system is also operating at Veracruz on the Gulf of Mexico.

 

WASTE WATER TREATMENT

BP TRUCK TERMINAL- KEWDALE

These tanks form an integral part in purifying and re-cycling water from the truck wash down bays. Not one drop of untreated water is allowed to escape into the natural ground water.

 

 

 

 
 
Agriculture & Aquaculture

Again the applications are many, ranging from storage tanks for spraying to aquaculture tanks for fire fighting purposes.

RURAL WATER SUPPLY - MOORA

2 x 150kl water storage tanks used by the WA Water Corporation to supply many farmers in the Moora region.
Over 96km of pipe was laid in the whole project.

A similar, but larger system has also been installed in the Mingenew district. This system services over 70 farmers through almost 200km of pipe.

Aquaculture Tanks

These poly aquaculture tanks are all made from food grade virgin poly with smooth internal surfaces - no loose fibres or harmful substances for either the fish or the farmer. They are lightweight and resilient, and easily located.

Available in sizes from 300 litres up to 9500 litres, and varying in diameters between 1 meter to 3.5 meters with heights between 0.42m and 1m.

 

 

WATER TROUGHS

A variety of sizes in either rectangular or round shapes.

 

POLY CUP AND SAUCER TANKS

For automatic paddock watering. Storage for either 2700 litres, 3700 litres or 5000 litres.

 

 

FIREIGHTING UNITS

Durable UV stabilised tank with integral baffle for stability, mounted on a strong hot dip galvanised stell frame with easy lifting and tie down points.

Equipped with a 5.5hp motor and 1.5" fire fighting pump.

 

 

 

 
 

There are many other products available, too numerous to mention here, but they include:

  Poultry feeders.
  Pig feeders.
  Molasses tanks and licker drums.
  Calf milk feeders - up to 12 teats.
  Chook laying boxes.
  Diesel cartage tanks.
  Spray tanks.

For further information, contact us